Types Of Clamps And Their Uses

Pipe clamps are usually found in connecting and sealing two round pipe pieces. They come majorly in two styles.


Traditional pipe clamp – It is just a horse shoe shaped round stock piece featuring threads on the ends and another little bit of a half-round flat stock containing holes on every end. The threaded ends of the initial piece are designed to pass through lock nut pairs and they can be tightened.

Flat band clamp – The style is primarily used on the exhaust pipes of stainless and is usually extended to seal joints without distorting the form of the pipe. The soft stainless steel flat piece is wrapped round the connecting pipes and a bolt is used to tighten so the two pipe clamp ends are fastened together to attain a connection seal.

Tips to Use Pipe Tube Clamps

When working with pipe clamps on exhaust pipes on vehicles or plumbing applications, it isn’t advisable to over tighten the clamp. This may lead to pipe distortions leading to leaks that cannot be sealed. How to measure angle cuts in wood It could also result in crushed pipe creation making separation impossible down the road. For a clamp that’s properly sealed, you should apply equal amounts of pressure on both clamp sides and then turn the nuts a full turn using a wrench when they are finger tight.

For plumbing pipes, it is suitable to use the band type clamp. For the reason that it is not susceptible to cracks and they usually do not crush the plastic pipe. The flat cradle clamp will on the other hand be perfect for supporting or hanging plastic pipes. The reason being it does not end up surrounding the pipe, but creates a cradle support type suspended from the long threaded rod that’s attached to a ceiling joist or floor joist.

When working with pipe clamps on high heat areas such as exhaust pipes of a vehicle, it is best to install them having an anti-seize compound which can be applied to clamp threads. This helps in ensuring the clamp will be easy to remove in the foreseeable future if the need arises. It is something that will be particularly helpful with a chrome exhaust pipe of show type vehicles. The anti-seize application can also be done under or inside the clamp on mating surfaces of exhaust pipes to assist easy system removal whenever necessary.

Choosing Pipe Clamps

The fact is there are so many Camlock fitting manufacturers today offering a variety of products including Camlock couplings, pipe and tube clamps. To get the best bang for your buck, it is advisable to select a reputable and reliable manufacturer. This can ensure that you get top quality products. When considering the available pipe tube clamps, think about the efficiency as far as your application needs are concerned. The dimensional accuracy is also of importance since a lack in exactly the same gives you sealing issues when you actually want to keep leakages at bay. Durability and the reliability of the pipe clamps are other factors to consider before making the ultimate solution.